Built-Up Edge in Gun Drilling: Causes and Fixes
Problem Description Built-up edge forms when workpiece material welds to the gun drill cutting edge. I see this most often on aluminum alloys and low-carbon steel like 1018. The welded material builds up layer by layer, changing the effective cutting geometry. A drill with BUE cuts differently with every pass, and the results are unpredictable. The results show up immediately. Surface finish jumps from 1.6 Ra to 6.3 Ra or worse. Hole diameter drifts as the buildup changes the drill’s effective size. I’ve measured bores opening by 0.08 mm as BUE accumulated during a single cut. On critical jobs, that kind of variation means the hole is scrap before the drill reaches full depth. ...