When a Simple Job Became the Hardest One of the Year
A customer sent me a print for what looked like the simplest job I had seen in months. It was a 4140 steel shaft, 600mm long, with a 20mm through-hole drilled axially from end to end. The print had no tight tolerances. The bore diameter was 20mm plus 0.5mm minus zero. The position tolerance was 0.5mm. The surface finish was 3.2 micrometers Ra. I had drilled hundreds of similar holes in 4140 over the previous five years. I quoted it as a standard gun drilling job at $85 per part for a batch of thirty-six pieces. ...