Rotating Union Maintenance and Seal Replacement
The rotating union transfers coolant from the stationary supply line to the rotating spindle. It is one of the most common failure points on a deep hole drilling machine. A failed union causes pressure loss and coolant spray, and it can also cause mist to flood the work zone. In my experience, roughly 30% of unscheduled downtime on deep hole machines traces directly back to this component. Anatomy of a Rotating Union The union sits between the machine coolant manifold and the spindle shaft. Inside, a stationary housing holds the inlet port while a rotating shaft connects to the spindle bore. The two halves meet at a mechanical seal face. Standard designs use silicon carbide seal faces running against a carbon ring. In larger machines rated above 80 bar, I have seen tungsten carbide faces used instead. The shaft rotates with the spindle, so the seal must maintain contact pressure while the spindle runs at several thousand RPM. ...